ADAPTEC
1130U2 KIT RAID PCI 0CHL FOR RAIDPORT II/III MOTHERBOARDS
Category Mass Storage Devices
Retail $299.00
Subcategory Drive Controllers, Accessories
Platform PC
Media INT
SKU# 100884
Manufacturer Part No. ARO-1130U2 KIT
UPC 0760884134399
Class  
Type  
Restriction  

Sales Description The ARO-1130U2 RAID card upgrades Adaptec SCSI chips mounted on motherboards equipped with a RAIDport III slot to perform as high-performance SCSI RAID channels.
Key Buying Points Enables Adaptec SCSI ships on the motherboard to perform as SCSI RAID channels
Supports RAID levels 0, 1, 0/1 and 5 for robust fault tolerance
RAID coprocessor delivers high performance by offloading RAID functions from system CPU
Intelligent cache, supporting 2 MB to 64 MB EDO DIMM, provides scalable performance
Hot-swap, hot-spare drive support maximizes system uptime
Easy-to-use GUI-based software makes installation and storage management simple
Tested for compatibility with hundreds of SCSI peripherals devices
Computer Bus: 32-bit PCI Local Bus with RAIDport III connector
Interface protocol: Bus Master DMA
Cache Memory: Up to 64 MBytes EDO DIMM
Host Burst Data Transfer Rate: Up to 133MBytes/sec burst rate (64-bit)
SCSI Synchronous Data Rate: Up to 80MBytes/sec per channel
Device Protocol: SCSI Ultra2, Ultra, Fast and Wide
Advanced Storage Management Features:
RAID co-processor
Hot spare (pool and dedicated)
Hot swap of drives
Array configuration on disk
SAF-TE support
User-defined rebuild priority
User-defined verify priority
Bootable array support
Hot-spare testing
Scheduler for rebuild, verify, and hot-spare testing
Array status monitoring and event notification
User-selectable broadcast and monitoring
Adjustable stripe width
Advanced Hardware Features:
60 NS EDO DIMM memory
Flash upgradable firmware and BIOS
SCSI Channels: Ultra2 SCSI chip connected to RAIDport III
Device Support: Up to 15 HDD/non-HDD SCSI per motherboard channel
Operating System support: Windows NT 4.0, NetWare 4.11 and 5.0, UnixWare 7.01
Remote management: Windowsr 95 and Windows NT 4.0

System & Other Requirements For a list of Compatible Motherboards go to:
http://www.adaptec.com/products/faqs/raidguide.html#aro1130u2
For a list of Compatible memory and memory specs go to:
http://www.adaptec.com/tools/compatibility/u2dimm.html


Product Dimensions & Warranty Information

Physical Dimensions (use same units as in General Information section)
Length 6.875 in.
Width/Depth 4.2 in.

Warranty

Standard Warranty 5 years

Product Specifications

Features

RAID Controller? Yes
Cache supported (Mbyte) up to 64MB
Supported RAID levels Raid 0,Raid 1,Raid 5,0/1

Bus type PCI
Controller type ULTRA2 SCSI
Connector type High Density 68
Number of devices supported 15 devices per motherboard channel
Bus mastering controller? Yes
Data transfer rate - sustained (Mbps) up to 80Mbps per channel
Data cable included? No
Supported Network OS Platforms Windows NT 4.0, NetWare 4.11 and 5.0, UnixWare 7.01

Accessory only

Platforms supported PC

Bill Of Materials ARO-1130U2 Zero Channel SCSI RAID card ARRAYCONFIGT, Windows NTr, Novell NetWare and UnixWare driver software
CI/O Management Software
Complete user documentation

Pallet Qty 0
Case Pack Qty 0
Shippable Carton Flag N
Package Length 11.5 Inches
Package Width 7.75 Inches
Package Height 3 Inches
 
Every effort has been made to ensure the accuracy of all information contained herein. Flintech makes no warranty expressed or implied with respect to accuracy of the information, including price, product editorials or product specifications. Product and manufacturer names are used only for the purpose of identification.