MAIN FEATURES
Description FASTTRAK100 TX2 ULTRA ATA/100 RAID CARD
Manufacturer PROMISE TECHNOLOGY
Manufacturer Part# FASTTRAK100-TX2
Platform PC
Product Description
With our TX2 products, there’s still plenty of ATA RAID 0,1 muscle for more modest computing needs – whether it’s performance or fault tolerant data protection. These products are best for small home office networks or standalone desktops.

FastTrak100 TX2 supports up to 4 Ultra ATA/100 drives on two independent data channels. Get RAID 0 striping speeds up to 200 MB/s sustained. TX2’s RAID 1 mirroring speeds will also blow away comparable RAID cards. House the drives inside the Promise SuperSwap “hot swap” chassises (two included with TX2 Pro) and get continuous PC operation even if a drive fails under RAID 1 mirroring.

Technical Specifications
Manufacturer Promise Technology
Quantity Single Pack
Drive Support Supports Ultra ATA/100 drives; backward compatible with older Ultra ATA and EIDE drives
PCI Bus Support Compatible with 66MHz PCI motherboards; automatically backward compatible with 33MHz
Primary Devices Supported 4
Number of Channels 2
Primary Port Placement Internal
Connector Style (2) 80-Wire/40-Pin IDE
BIOS Type Proprietary
Burst Transfer Rate 200 MBps
Burst Transfer Rate 100 MBps
Operating Systems Windows 95/98/Me, Windows NT4/2000; RedHat Linux 6.2/7.0; Netware 3.12/4.1x/5.0
Other Features Hot Plug Drive Support
Package Includes Drivers, (2) 80-Wire/40-Pin IDE Cable, Documentation
Misc Features ATAPI Support
Advanced Monitoring Supports DMI for array monitoring through network; monitors S.M.A.R.T. status of attached hard drives; logs array errors and events to Windows NT4/2000 Event Log
Raid Levels RAID 0 striping of up to 4 drives for performance
RAID 1 mirroring of 2 drives for fault tolerance
RAID 0+1 striping/mirroring of 4 drives